PC Customization

How to Reset Overclock [Using BIOS]: The Easy Way

Whether you are a computer enthusiast or a hard-core gamer, you are here because you must have tried giving your computer the extra annexes to exceed its maximum power but ended up as failed. 

On the one hand, a failed overclocking is a risky situation where your computer is on the verge of destroying and on the other hand, it’s a complete frustration. So, what is the way out? A reset to stock overclock.

You know the answer, but do you know how to reset an overclock after failed to overclock? 

Well, we are here to discuss the same thing and a lot more like does overclocking GPU make a difference and does overclocking GPU increase FPS. 

Just like any other fascinating exploration, overclocking comes with some risks too. We suggest you take a reverse gear ASAP by going for a reset to stock overclock or ask us how to reset BIOS after bad overclock.

Why Would You Want to Reset An Overclocked CPU?

These major obstructions will eventually lead you towards a reset ram overclock. 

It was Wearing Your CPU Out

You might experience your CPU falling back day by day after overclocking being done. The possible reasons might be improper overclocking done or poorly grade hardware with higher than safe voltage.

Your CPU can suffer severely to dead with an absence of a well-matched cooling setup and everyday safe voltage after overclocking; that’s where reset CPU overclock is needed.

The reason why an overclocked CPU gets wear out is quite simple. Besides getting a higher performance, there is excessive heat that comes along.

Overclocking also involves increasing the CPU voltage, though. The intense overclocking is more likely to consume higher voltage, resulting in a worn-out CPU.

CPU Frequency is Unnecessarily Going High

The other main concern is CPU high frequency that remains on the peak. You need to increase the supply of voltage to the CPU to achieve a higher overclocking. 

Heat is a byproduct of this procedure, but the frequency can cause serious damage to the chip resulting in even burn. Suppose the CPU is showing high GHz after overclocking. In that case, it’s likely going to affect other components associated with the processor. 

You’re Just Retiring Your CPU and Motherboard

You must be mindful of the risks that you will endanger your other computer component like motherboard while gaining high performance. The motherboard holds many essential functions in the CPU, and the power supply is one of them.

Overclocking your CPU causes it to draw more power than it does at stock. When you stretch your motherboard’s power delivery capabilities, the VRM (voltage regulator module) fixed on the motherboard becomes inefficient and sheds more heat. That may result in a trip to overheat protection, throttling down the CPU, or simply catching up the fire. Before encountering the extreme stage, we recommend a reset CPU overclock.

How to Reset Overclock from BIOS

If you have played around with your computer BIOS (Basic Input and Output Setting) and end up being messed up with overclocking, here is the way out of how to reset all overclock settings using your BIOS system.

Step 1: 

Turn on the computer system and wait for the boot screen until it appears. Boot screen shows all the parts connected to the motherboard, including HDD hard drive, CPU (central processing unit), and all the other electronics connected with the system through USB ports. You will see the boot screen appearing in two colors that are mostly white and black.

Step 2: 

Press the ‘DELETE’ key or ‘F1’ or ‘F2’ (as per your model and manufacturer type) to access your system’s BIOS during the booting process. Sometimes BIOS screen loads up so fast that it needs to be seen with focus. Often it does not show up when you turn on the computer. To get into the BIOS, keep pressing the ‘DELETE’ or ‘F2’ key rapidly.

Step 3: 

After getting access to BIOS, go to the ‘Advance Chipset Features’ and then clicks on the ‘CPU multiplier’ feature. Toggle between all the options and look for the ‘Restore Default Settings. Probably it lies in the last of CPU multiplier drop-down settings. Press the ‘Enter’ key to it.

Step 4: 

Then click ‘F10’ to save all the settings made and restart the computer. The system should run on its default setting and speed. That is, overclock settings being reset successfully!

Step 5:

To get a complete reset to stock overclock, go into your BIOS and hit the ‘F9’ key to reset everything to default. Press the ‘F10’ key to save the changes and restart the computer as normal. The changes will take effect immediately.

Step 6: 

A well-performed GPU overclocking can reward you In terms of smooth transitions and increased FPS rate up to 15%. A failed GPU overclocking may occur due to other low-grade hardware. 

Now, you have tried GPU overclocking and you failed. Either you see no enhancement in performance, or you find your system crashing.

In either case, it’s best to nullify the settings of overclocking by changing back to normal through the overclocking software, whether it be MSI afterburner or Ryzen master.

Can you reset it from The ‘Reset’ Button on Your Board?

Suppose you want to reset BIOS after failed overclock and want to know how to reset an overclock. In that case, you should go for a manual reset option while using Reset Button on the motherboard.

A failed overclocked Graphics Card won’t let you in the BIOS or any other setting because of frequent shut-offs, and thus you will end up with the ‘Clear CMOS’ method.

To do so, check around the back of the CPU case for a ‘Reset CMOS’ or ‘Clear CMOS’ button.

Most modern computers come with an outside mounted reset button. If you could not find it at the back, remove the case and look at the motherboard. There must be one; press and hold this button for 3-10 seconds, then start up your computer again to see what comes up. You should 

Will Updating Bios Reset Overclock?

From time to time, your PC manufacturer tends to offer BIOS updates. These updates enable the motherboard to identify new hardware and increase its stability correctly.

A BIOS update will restore it to the factory-enabled settings. Updating BIOS will make it reset to default settings.

After the BIOS is updated, you will be taken to the section where you can review and adjust the settings about the drive that you boot from the overclocking features.

As per our experience, not all the BIOS updates are necessary to install as far as your system is ruining smoothly without any power fluctuations.

If you want to keep the BIOS setting as same and do not want to receive updates, you can disable them by going into the BIOS setup.

Enter into the BIOS setup and change the “Windows UEFI firmware update” to disable. To be on the save side, reset BIOS after failed overclock to its factory settings before applying any further updates. 

5 Tips While Resetting an Overclocked CPU

You tried out overclocking to make your CPU go that extra mile, but it didn’t work out. Now you want to know all about how to reset all overclock settings. That’s where I am going to help you with, but make mind notes of these:

  1. If you are doing reset BIOS after failed overclock, do a backup of your existing BIOS at first.
  2. Note down all the overclocked values on a paper to refer to in future settings and to check later if overclock settings being reset
  3. Do not perform a ‘Clear CMOS’ reset while the system is plugged into the wall socket. Put the computer off, get all the cables and wire connectors out to release the charge from the CMOS. 
  4. If you are going to reset overclock GPU make sure to uninstall the software first and then reinstall it. It will erase all the existing settings and make your actions effective in the meantime. 
  5. You tried overclocking and you failed. That because you didn’t put enough attention to the details. This time, when resetting, it’s better to take along someone who is a geek and has some knowledge about overclocking and the reset things. 

FAQs:

How to reset bios after bad overclock?

Enter into the CMOS and BIOS settings of the system and revert all the current settings of the motherboard to stock. You can do the same by choosing the ‘Restore Fail-Safe Defaults’ option in BIOS.

How to reset MSI afterburner overclock?

You can delete all the profiles in the MSI afterburner programming files folder in Windows to reset to stock overclock. You can do the same if you don’t know how to reset overclock GPU.

How to reset Ryzen master overclock?

Suppose your GPU overclocking didn’t go well with the Ryzen master overclock software. In that case, you could undo the whole process simply by clicking the ‘Reset Button on the top right corner of the software interface. Do it and restart the computer. Nothing changed? Uninstall it and reset CMOS through BIOS. It will fix it back to factory defaults.

Does clearing CMOS reset overclock?

It depends on the overclocking you have performed. Likewise, overclocking done on the CPU or Motherboard can be wiped out by clearing CMOS. It will also work for reset RAM overclock

Will updating BIOS reset overclock?

Yes, assuming that a BIOS update will set it back to factory defaults, it will also clear any overclocking done on the hardware parts. Exceptions are for the GPU overclocking. 

Conclusion

To sum up, to reset all the overclocking, you will have to inverse all the changes made to your system. Unless major hardware damage is caused, the restoration process should be functional and smooth.

With the modern range of Intel and AMD processors capable of running at clocking speeds that exceed up to 3GHz, I do not feel a need to overclock computer components and graphic cards anymore.

Just because the CPU can be overclocked for better performance, it doesn’t mean that it implies all types and manufacturers. Mostly it depends on hardware quality and method to choose for overclocking, one of the safest ones is AMD overdrive if you are curious enough to know if AMD overdrive safe? 

I highly recommend the high-end AMD utility upgraded as AMD Ryzen Master, a better alternative of actually overclocking the computer. These are like automated overlocking built into the processor that runs on demand. 

A chartered accountant by profession and a tech blogger by passion. A psychic addict of tech and has a great zeal to explore new things and is motivated to spread knowledge. Thus BrokenAnalog was born with a simple mission - To provide quality self-serving computing & tech information.